VANCOUVER, British Columbia--(
BUSINESS WIRE)--Dec. 12, 2003--Alamos Gold Inc. is pleased to announce assay results from five additional holes of the recently concluded fifteen-hole underground core-drilling program within the Cerro Estrella portion of the Mulatos deposit in Sonora, Mexico. A total of 1821.5m of core were drilled in the Phase I program, with five areas of higher-grade structurally controlled mineralization tested.
Drill hole results are consistent with the first four holes, and continue to demonstrate significant intercepts of gold mineralization higher than the average grade of the deposit. Drill hole composite intervals are presented in the following table:
NOPAL/CANTIL UNDERGROUND CORE HOLES
COMPOSITE RESULTS
---------------------------------------------------------------------
DRILL
HOLE
(Azimuth/ LITHOLOGY/
Inclin- TOTAL INTER- GOLD ALTERATION/
ation) DEPTH FROM TO VAL (m) g/t OXIDATION
---------------------------------------------------------------------
NP03-01 129.3 0 114.74 114.74 3.05 0-79.85m Rhyodacite
(240/+25) porphyry, strong
advanced argillic
alteration,
unoxidized. 79.85-
110m Rhyodacite
porphyry, strong
Includes: 3.05 29.06 26.01 6.47 vuggy silica
(uncut) alteration,
strongly oxidized.
110-129.3
volcaniclastic
conglomerate,
5.20 strongly argillized.
(cut to
34 g/t)
---------------------------------------------------------------------
NP03-05 100.05 0 47.13 47.13 2.68 0-100.5m Rhyodacite
(240/+25) porphyry, strong
53.21 86.65 33.44 1.97 advanced argillic
alteration with local
silicified zones,
unoxidized.
---------------------------------------------------------------------
NP03-06 106.1 0 102.5 102.5 5.45 0-12.8m Rhyodacite
(240/-20) porphyry, moderate
to strong silica
alteration, moderately
to strongly oxidized.
Includes: 32.12 40.97 8.85 11.76 12.8-102.5m
Rhyodacite porphyry,
70.37 76.49 6.94 29.25 strong-intense vuggy
(uncut) silica alteration,
strongly oxidized.
22.96
(cut to
34g/t)
---------------------------------------------------------------------
NP03-07 101.4 0 101.4 101.4 2.14 0-29.85m Rhyodacite
(050/0) porphyry, strong
silicic alteration,
strongly oxidized.
29.85-101.4m
Rhyodacite porphyry,
strong vuggy silica
alteration, strongly
oxidized.
---------------------------------------------------------------------
CT03-03 141.4 0 79.36 79.36 3.01 0-134.47m
(230/0) Volcaniclastic
conglomerate,
82.45 134.47 52.02 1.98 coarse-grained
facies, strongly
silicified with zones
advanced argillic
alteration, strong
fracture-controlled
oxidization in
silicified intervals.
---------------------------------------------------------------------
Drill holes NP03-01, NP03-05, NP03-06, NP03-07 were drilled in the main Cerro Estrella structural zone and substantiate the concept of higher-grade gold concentrations within broad structural zones. NP03-06, NP03-03, and NP03-04 (previous release) and NP03-01 and NP03-05 are fan holes that demonstrate mineralization continuity a minimum of 75m vertically within the zones. Forthcoming holes will provide intercepts at higher elevations. Highest-grade intercepts in NP03-06 include 3.1m at 48.25 g/t (uncut) and 1.5m @ 34.9 g/t.
Drill hole CT03-03 is significant in that it was drilled in the northern portion of the Cerro Estrella area and tests a separate structural zone. CT03-03 assay results indicate a width of +3 g/t gold mineralization approximately twice that predicted by the previous model. Intercept widths are believed to be roughly reflective of true zone widths at the Nopal level elevation. A 0.5g/t cut-off grade was used for calculation of composite intervals, with only a single 1.5m interval of sub-0.5 g/t material allowed within a composite interval. A map of drill hole locations can be accessed at the following website: http://www.alamosgold.com/i/maps/agi-dec022003-map.gif.
The Mulatos underground drilling program is being carried out under the direction of Ken Balleweg, BSc. Geological Engineering, MSc. Geology. Mr. Balleweg is Alamos' Exploration Manager and the Qualified Person as that term is defined in National Instrument 43-101 of the Canadian Securities Administrators. Strict sampling and QA/QC protocol are followed, including use of the same sampling procedures and standards used in previous Placer Dome drilling programs. Sample intervals are 1.5 m, except to accommodate geologic contacts. The NQ2 core is cut on site, and half sent to BSI Inspectorate Laboratories in Reno, Nevada for analysis. Analytical method is fire assay with atomic adsorption finish and gravimetric finish for individual samples with a gold concentration greater than 3.0 g/t. All remaining holes have been processed and shipped for analysis. Assay results from the remaining holes are anticipated by month-end.
Safe Harbor Statement under the United States Private Securities Litigation Act of 1995: Statement in this release that are forward-looking, including statements relating to the future recovery of the Mulatos Project, are subject to various risks and uncertainties concerning the specific factors identified about in the Company's periodic filings with the Ontario Securities Commission and the U. S. Securities Exchange Commission. Such information contained herein represents management's best judgment as of the date hereof based on information currently available. The Company does not intend to update this information and disclaims any legal liability to the contrary.
The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.